My Homepage

A Winter Storage Guide For Motorcycles

To be able to make sure that your motorcycle is in excellent condition when you want to utilize it, make sure that you properly winterize the vehicle. The next are some steps which will allow you to to make sure that your motorcycle stays in mint condition:

Step #1

Warm up the Gogoro 2 delight bike after the final ride you take so that all of the condensation in the bike is dried from the exhaust. Fill up the tank completely after your ride because unleaded petrol has the capacity to evaporate when getting into experience of oxygen. This will cause potential residue that may clog the carb.

Step #2

Turn the fuel tap off and make sure that the engine runs until it ceases to function.

Step #3

Remove all of the float bowl petrol following the engine stalls. If the bike is older than four years, you should consider completely emptying the tank as water may accumulate in the tank's base and cause rusting.

Step #4

Use WD40 or another oil spray to all metal parts except for the working surfaces like the control levers, footrests, and brake discs. This may serve to avoid corrosion and spraying the metal several times through the entire winter may also help prevent damage. Additionally, inspect the bike to make sure that there is no grime or grit building on the motorcycle.

Step #5

Clean all of the different parts of the bike where water or dirt may collect. This is particularly important with the shock absorber linkages, the radiator, and engine where dirt is more prone to collect.

Step #6

Ensure that all of the electrical connectors have now been well oiled particularly on bikes which have numerous exposed components.

Step #7

If you wish to use your bike during the wintertime months, place mudguard extenders on the bike to protect against road dirt and salt. After every ride, wash away any salt or dirt and dry the bike thoroughly. The tyres must certainly be particularly maintained during the wintertime because they are necessary to work harder so winter tyres are a great idea for colder weather.

Step #8

Ensure that the drive chain is lubricated to avoid rust and that all of the pivot points are oiled as well. The foot peg pivots are particularly important while they will probably collect dirt and salt. When corrosion first occurs, act immediately so that it won't spread to other areas of the bike.

These tips to winterize the bike aren't complete but provide a general guide to protect your bike through the colder months. Proper care and maintenance will ensure that your bike will withstand the wintertime and maintain excellent condition and just like functional in the spring.


This website was created for free with Would you also like to have your own website?
Sign up for free